Tap water report · updated November 2026
Oklahoma City tap water: lithium up to 68 µg/L
What’s in the water Oklahoma City Water Utilities Trust delivers to 644,000 people, from national testing by the U.S. Environmental Protection Agency (EPA) and the utility’s own report.
Short answer
Oklahoma City Water Utilities Trust’s annual water quality report doesn’t include a hardness figure, so there’s no published number for Oklahoma City. Ask the utility, or a home test strip gives you one in a minute. The U.S. Environmental Protection Agency’s (EPA’s) 2024 testing found no PFOA or PFOS (two PFAS “forever chemicals”) at or above its 4 parts per trillion (ppt) limit. Lithium reached 68 micrograms per liter (µg/L), above EPA’s 10 µg/L health reference level, which is not a legal limit. The system had no health-based violations in the five years through September 2026.
Sources: EPA UCMR 5, EPA SDWIS 2026Q3 · Sources and method
How Oklahoma City compares with the 40 systems we track
PFOA / PFOS
Not detected
in any EPA sample
Lithium
5th highest
of 14 that detected it
Size
34th largest
of 40 by people served
01 · What it means
What these readings mean for your home
Each reading in plain English: what it is, how Oklahoma City compares with the other systems we track, and whether there’s anything to do. The tags follow EPA’s limits and reference levels where EPA has one; for hardness, which has no EPA limit, they follow the U.S. Geological Survey (USGS) scale and Minnesota’s health department. New to the acronyms? Every term, in plain English.
Hardness
Worth knowingHardness is dissolved calcium and magnesium. It isn’t a health issue, but it decides whether a softener is worth buying. It’s measured in grains per gallon (gpg).
Here: Hardness isn’t in the Oklahoma City Water Utilities Trust annual water quality report, so there’s no published number for Oklahoma City. You can ask the utility, or test it yourself.
What to do: A hardness test strip or a lab test gives you the number in minutes. Then use the sizing calculator to see whether a softener makes sense.
What the research says: Studies tie hard water to more soap use and scale. Observational studies link it with somewhat more eczema in babies, but in the largest trial a softener didn’t improve existing eczema. The studies →
Learn more →PFAS (PFOA and PFOS)
Nothing to doPFAS are a family of thousands of manufactured chemicals used in many consumer and industrial products. They break down very slowly, which is why people call them "forever chemicals." PFOA and PFOS are the two EPA regulates most tightly. They’re measured in parts per trillion (ppt): 1 ppt is about one drop in 20 Olympic swimming pools.
Here: EPA’s 2024 testing found no PFOA or PFOS in Oklahoma City’s water at or above 4 ppt, the lowest level labs can reliably measure. 29 of the 40 systems we track can say the same; 11 had a sample over the limit.
What to do: Nothing needed by EPA’s standard. If you want PFAS lower still, the same certified filters apply.
What the research says: EPA and the National Academies link PFOA and PFOS exposure to higher cholesterol, lower vaccine response, lower birth weight and some cancers, mostly over years of drinking the water. The studies →
Learn more →Disinfectant
Nothing to doUtilities add a small amount of chlorine, or chloramine (chlorine combined with a little ammonia), so germs can’t grow in the pipes on the way to your tap. EPA allows up to 4 milligrams per liter (mg/L) of either and says water within its standards can be used for drinking, cooking and bathing.
Here: Oklahoma City uses chloramine, like 20 other systems we track. It lasts longer in pipes than chlorine and is harder to filter.
What to do: For taste, use catalytic carbon or a filter certified to NSF/ANSI 42 for chloramine. Fish tanks and home dialysis need it removed completely.
What the research says: Health agencies call these levels acceptable for drinking and bathing; dialysis and fish tanks are the exceptions. Studies haven’t shown shower chlorine harms skin or hair. The studies →
Learn more →Lithium
Worth knowingLithium is a metal that occurs naturally in some rock and groundwater. There’s no legal limit in drinking water. EPA screens results against 10 micrograms per liter (µg/L) while it studies whether a limit is needed.
Here: Oklahoma City’s highest sample was 68 µg/L, about 7 times EPA’s screening level, 5th-highest of the 40. 11 of the 40 were above it. Nationally, about 24% of large systems are.
What to do: No action is required, since there’s no limit. If you want less, ask a filter maker for independent test data on lithium specifically, since a PFAS or chlorine certification says nothing about it.
What the research says: Some regional studies link natural lithium with lower suicide rates and the largest individual study found no link. EPA’s screening level is cautious, not a harm threshold. The studies →
Learn more →Health-based violations
Nothing to doA health-based violation means the utility broke a federal drinking water rule tied to health: it went over a limit, or skipped a required treatment step. Missing a paperwork deadline doesn’t count.
Here: Oklahoma City’s system had none in the five years through September 2026. That’s normal for a large system: 36 of the 40 we track had none.
What to do: Nothing to do.
Learn more →How Oklahoma City compares: highest PFOA or PFOS sample
Parts per trillion (ppt), from EPA’s 2023–25 testing. The dashed line is EPA’s limit of 4.
Oklahoma City: none at or above 4 ppt. Like 28 other systems we track, EPA’s testing found no PFOA or PFOS there. These 11 did:
- Miami33.0 PFOS
- El Paso8.5 PFOS
- Fort Worth8.3 PFOA
- Philadelphia8.1 PFOA
- Louisville7.5 PFOA
- Tampa6.9 PFOS
- Dallas6.3 PFOA
- San Jose6.2 PFOS
- Cincinnati6.1 PFOS
- Columbus5.3 PFOA
- Austin4.8 PFOS
If you live in Oklahoma City
02 · The full results
Every PFAS result EPA recorded
EPA’s national testing (sampled 2024) found no PFOA or PFOS at or above 4 ppt in any of 8 samples, which puts Oklahoma City under EPA’s limit for both.
Lithium reached 68 µg/L, above EPA’s health reference level of 10 µg/L. That level is a screening benchmark, not a legal limit, and about 24% of large US systems tested above it.
Results from EPA’s national testing program (UCMR 5) for Oklahoma City Water Utilities Trust, 2 sampling points, January 2024 to October 2024. Concentrations in parts per trillion (ppt).
| Chemical | Samples | Detected | Highest | EPA limit |
|---|---|---|---|---|
| PFOA (perfluorooctanoic acid) | 8 | 0 | none | 4 |
| PFOS (perfluorooctane sulfonic acid) | 8 | 0 | none | 4 |
| PFHxS | 8 | 0 | none | 10 |
| PFNA | 8 | 0 | none | 10 |
| HFPO-DA (GenX) | 8 | 0 | none | 10 |
"None" means every sample was under EPA’s reporting level (4 ppt for PFOA). PFHxS, PFNA and HFPO-DA (GenX) are three other PFAS chemicals; EPA proposed removing their limits in May 2026, and that isn’t final.
03 · Where it comes from
The source, and who else drinks it
Oklahoma City treats raw water from the Hefner and Draper reservoirs at its two plants, with supply also coming from Canton Reservoir in the northwest and the McGee Creek and Atoka reservoirs in the southeast.
Oklahoma City Water Utilities Trust serves about 644,000 people directly, and 12 other water systems buy water from it, serving about 337,560 more. If you live in one of them, most of what’s on this page describes your water too, though hardness and disinfectant can change if your system blends in its own wells.
Oklahoma City’s water system had no health-based violations in the five years through September 2026, according to EPA’s federal database.
Largest systems that buy from Oklahoma City Water Utilities Trust
- Norman Utilities Authority104,868
- Edmond Pwa79,408
- Moore Public Works Authority55,083
- Yukon22,498
- Bethany20,307
- Mustang, City of18,576
- El Reno16,212
- Newcastle7,900
- Piedmont Municipal Authority7,542
- Blanchard2,966
From EPA’s federal drinking water database (SDWIS), 2026Q3: community systems with an active connection buying from OK1020902. Population served.
ZIP codes Oklahoma City Water Utilities Trust reports serving (82)
73003 · 73008 · 73009 · 73012 · 73013 · 73014 · 73032 · 73034 · 73036 · 73049 · 73054 · 73062 · 73064 · 73065 · 73068 · 73069 · 73070 · 73071 · 73078 · 73079 · 73083 · 73084 · 73089 · 73093 · 73097 · 73099 · 73101 · 73102 · 73103 · 73104 · 73105 · 73106 · 73107 · 73108 · 73109 · 73110 · 73111 · 73112 · 73114 · 73115 · 73116 · 73117 · 73118 · 73119 · 73120 · 73121 · 73122 · 73126 · 73127 · 73128 · 73129 · 73130 · 73131 · 73132 · 73134 · 73135 · 73136 · 73137 · 73139 · 73141 · 73142 · 73143 · 73144 · 73145 · 73148 · 73149 · 73150 · 73151 · 73154 · 73157 · 73159 · 73160 · 73162 · 73164 · 73165 · 73167 · 73169 · 73170 · 73172 · 73173 · 73179 · 73189
From EPA’s UCMR 5 ZIP file. A ZIP can be served by more than one system; your water bill names yours. Look up any ZIP.
04 · Questions
Oklahoma City water questions
Is Oklahoma City tap water safe to drink?
The U.S. Environmental Protection Agency (EPA) doesn’t grade a city’s tap water as safe or unsafe; it sets limits and records violations. By that record, Oklahoma City’s water system had no health-based violations of federal drinking water rules in the five years through September 2026. EPA’s 2024 testing found no PFOA or PFOS (two PFAS “forever chemicals”) samples above its 4 parts per trillion (ppt) limit.
Is Oklahoma City tap water hard?
Oklahoma City Water Utilities Trust’s annual water quality report doesn’t include a hardness figure, so there’s no published number for Oklahoma City. Ask the utility, or a home test strip gives you one in a minute.
Does Oklahoma City tap water have PFAS?
The U.S. Environmental Protection Agency’s (EPA’s) national testing (sampled 2024) found no PFOA or PFOS (two PFAS “forever chemicals”) at or above 4 parts per trillion (ppt) in any of 8 samples, which puts Oklahoma City under EPA’s limit for both.
Does Oklahoma City use chlorine or chloramine?
Chloramine. Oklahoma City disinfects with a small amount of chlorine and ammonia before the water enters the distribution system, and its report lists chloramines.
Has Oklahoma City’s water system had violations?
Oklahoma City’s water system had no health-based violations in the five years through September 2026, according to the U.S. Environmental Protection Agency’s (EPA’s) federal database.
Is there lithium in Oklahoma City water?
Lithium reached 68 micrograms per liter (µg/L), above the U.S. Environmental Protection Agency’s (EPA’s) health reference level of 10 µg/L. That level is a screening benchmark, not a legal limit, and about 24% of large US systems tested above it.
Nearest cities we cover
Sources
- 01Oklahoma City Water Utilities Trust water quality report (checked for hardness), read 2026-11-04
- 02Oklahoma City Water Utilities Trust (source water)
- 03EPA, Fifth Unregulated Contaminant Monitoring Rule (UCMR 5) occurrence data, file posted 2026-10-15
- 04EPA, Safe Drinking Water Information System via ECHO, 2026Q3 file
- 05EPA, PFAS National Primary Drinking Water Regulation, 89 FR 32532
- 06EPA UCMR 5 Data Summary (July 2026)
- 07USGS Water Science School, "Hardness of Water"
EPA system ID OK1020902 · Oklahoma City Water Utilities Trust