Skip to content

Tap water report · updated November 2026

Milwaukee tap water: hard water, no PFOA or PFOS found

What’s in the water Milwaukee Water Works delivers to 626,000 people, from national testing by the U.S. Environmental Protection Agency (EPA) and the utility’s own report.

Short answer

Milwaukee tap water is hard: about 8.1 grains per gallon (138 milligrams per liter (mg/L)), according to published water quality data from Milwaukee Water Works (2025). The U.S. Environmental Protection Agency’s (EPA’s) 2023 testing found no PFOA or PFOS (two PFAS “forever chemicals”) at or above its 4 parts per trillion (ppt) limit. The system had no health-based violations in the five years through September 2026.

Sources: Milwaukee Water Works 2025 data, EPA UCMR 5, EPA SDWIS 2026Q3 · Sources and method

Hardness

8.1gpg

138 mg/L

Hard

Milwaukee Water Works, 2025 data

PFAS (PFOA, PFOS)

None found

every sample under 4 ppt

Under EPA’s 4 ppt limit

EPA UCMR 5, sampled 2023

Disinfectant

Chloramine

Catalytic carbon removes it

Milwaukee Water Works

Violations

0

health-based, 5 years

None on record

EPA SDWIS, through September 2026

How Milwaukee compares with the 40 systems we track

  • Hardness

    12th hardest

    of 34 systems

  • PFOA / PFOS

    Not detected

    in any EPA sample

  • Size

    37th largest

    of 40 by people served

Compare every system in the 2026 report →

01 · What it means

What these readings mean for your home

Each reading in plain English: what it is, how Milwaukee compares with the other systems we track, and whether there’s anything to do. The tags follow EPA’s limits and reference levels where EPA has one; for hardness, which has no EPA limit, they follow the U.S. Geological Survey (USGS) scale and Minnesota’s health department. New to the acronyms? Every term, in plain English.

Hardness

Worth acting on

Hardness is dissolved calcium and magnesium, picked up as water runs through rock. It isn’t a health issue (EPA has no limit for it). It’s what leaves white crust on faucets, spots on glasses and scale inside your water heater. It’s measured in grains per gallon (gpg); 1 gpg is about 17 mg of minerals in a liter.

Here: At 8.1 gpg, Milwaukee water is hard, the 12th-hardest of the 34 systems we track. Most homes here notice scale and spotting.

What to do: A water softener is the only whole-house system that removes hardness. Size it to your household so it doesn’t waste salt.

What the research says: Studies tie hard water to more soap use and scale. Observational studies link it with somewhat more eczema in babies, but in the largest trial a softener didn’t improve existing eczema. The studies →

Learn more →

PFAS (PFOA and PFOS)

Nothing to do

PFAS are a family of thousands of manufactured chemicals used in many consumer and industrial products. They break down very slowly, which is why people call them "forever chemicals." PFOA and PFOS are the two EPA regulates most tightly. They’re measured in parts per trillion (ppt): 1 ppt is about one drop in 20 Olympic swimming pools.

Here: EPA’s 2023 testing found no PFOA or PFOS in Milwaukee’s water at or above 4 ppt, the lowest level labs can reliably measure. 29 of the 40 systems we track can say the same; 11 had a sample over the limit.

What to do: Nothing needed by EPA’s standard. If you want PFAS lower still, the same certified filters apply.

What the research says: EPA and the National Academies link PFOA and PFOS exposure to higher cholesterol, lower vaccine response, lower birth weight and some cancers, mostly over years of drinking the water. The studies →

Learn more →

Disinfectant

Nothing to do

Utilities add a small amount of chlorine, or chloramine (chlorine combined with a little ammonia), so germs can’t grow in the pipes on the way to your tap. EPA allows up to 4 milligrams per liter (mg/L) of either and says water within its standards can be used for drinking, cooking and bathing.

Here: Milwaukee uses chloramine, like 20 other systems we track. It lasts longer in pipes than chlorine and is harder to filter.

What to do: For taste, use catalytic carbon or a filter certified to NSF/ANSI 42 for chloramine. Fish tanks and home dialysis need it removed completely.

What the research says: Health agencies call these levels acceptable for drinking and bathing; dialysis and fish tanks are the exceptions. Studies haven’t shown shower chlorine harms skin or hair. The studies →

Learn more →

Health-based violations

Nothing to do

A health-based violation means the utility broke a federal drinking water rule tied to health: it went over a limit, or skipped a required treatment step. Missing a paperwork deadline doesn’t count.

Here: Milwaukee’s system had none in the five years through September 2026. That’s normal for a large system: 36 of the 40 we track had none.

What to do: Nothing to do.

Learn more →

How Milwaukee compares: highest PFOA or PFOS sample

Parts per trillion (ppt), from EPA’s 2023–25 testing. The dashed line is EPA’s limit of 4.

Milwaukee: none at or above 4 ppt. Like 28 other systems we track, EPA’s testing found no PFOA or PFOS there. These 11 did:

  1. Miami33.0 PFOS
  2. El Paso8.5 PFOS
  3. Fort Worth8.3 PFOA
  4. Philadelphia8.1 PFOA
  5. Louisville7.5 PFOA
  6. Tampa6.9 PFOS
  7. Dallas6.3 PFOA
  8. San Jose6.2 PFOS
  9. Cincinnati6.1 PFOS
  10. Columbus5.3 PFOA
  11. Austin4.8 PFOS
Each bar is one system’s highest single sample, not a yearly average. 11 of 40 systems detected PFOA or PFOS; the other 29 had nothing at or above 4 ppt, Milwaukee among them. All 40 systems

If you live in Milwaukee

Milwaukee’s water is hard. Softeners from brands that sell online, at their own store prices:

02 · The full results

Every PFAS result EPA recorded

EPA’s national testing (sampled 2023) found no PFOA or PFOS at or above 4 ppt in any of 8 samples, which puts Milwaukee under EPA’s limit for both.

Results from EPA’s national testing program (UCMR 5) for Milwaukee Water Works, 2 sampling points, February 2023 to November 2023. Concentrations in parts per trillion (ppt).

EPA UCMR 5 PFAS results for Milwaukee
ChemicalSamplesDetectedHighestEPA limit
PFOA (perfluorooctanoic acid)80none4
PFOS (perfluorooctane sulfonic acid)80none4
PFHxS80none10
PFNA80none10
HFPO-DA (GenX)80none10

"None" means every sample was under EPA’s reporting level (4 ppt for PFOA). PFHxS, PFNA and HFPO-DA (GenX) are three other PFAS chemicals; EPA proposed removing their limits in May 2026, and that isn’t final.

03 · Where it comes from

The source, and who else drinks it

Milwaukee’s drinking water comes from Lake Michigan.

Milwaukee Water Works serves about 626,000 people directly, and 10 other water systems buy water from it, serving about 288,790 more. If you live in one of them, most of what’s on this page describes your water too, though hardness and disinfectant can change if your system blends in its own wells.

Milwaukee’s water system had no health-based violations in the five years through September 2026, according to EPA’s federal database.

Largest systems that buy from Milwaukee Water Works

  • Waukesha Water Utility70,718
  • West Allis Waterworks63,240
  • Wauwatosa Waterworks49,064
  • New Berlin Water Utility27,899
  • Menomonee Falls Ww - Surface Water23,867
  • Greendale Waterworks14,393
  • Shorewood Waterworks13,535
  • Brown Deer Waterworks12,741
  • Mequon Water Utility11,152
  • Butler Waterworks2,181

From EPA’s federal drinking water database (SDWIS), 2026Q3: community systems with an active connection buying from WI2410100. Population served.

ZIP codes Milwaukee Water Works reports serving (42)

53130 · 53132 · 53201 · 53202 · 53203 · 53204 · 53205 · 53206 · 53207 · 53208 · 53209 · 53210 · 53211 · 53212 · 53213 · 53214 · 53215 · 53216 · 53217 · 53218 · 53219 · 53220 · 53221 · 53222 · 53223 · 53224 · 53225 · 53226 · 53227 · 53228 · 53233 · 53234 · 53235 · 53237 · 53259 · 53263 · 53274 · 53278 · 53288 · 53290 · 53293 · 53295

From EPA’s UCMR 5 ZIP file. A ZIP can be served by more than one system; your water bill names yours. Look up any ZIP.

04 · Questions

Milwaukee water questions

Is Milwaukee tap water safe to drink?

The U.S. Environmental Protection Agency (EPA) doesn’t grade a city’s tap water as safe or unsafe; it sets limits and records violations. By that record, Milwaukee’s water system had no health-based violations of federal drinking water rules in the five years through September 2026. EPA’s 2023 testing found no PFOA or PFOS (two PFAS “forever chemicals”) samples above its 4 parts per trillion (ppt) limit.

Is Milwaukee tap water hard?

Milwaukee tap water is hard: about 8.1 grains per gallon (138 milligrams per liter (mg/L)), according to published water quality data from Milwaukee Water Works (2025).

Does Milwaukee tap water have PFAS?

The U.S. Environmental Protection Agency’s (EPA’s) national testing (sampled 2023) found no PFOA or PFOS (two PFAS “forever chemicals”) at or above 4 parts per trillion (ppt) in any of 8 samples, which puts Milwaukee under EPA’s limit for both.

Does Milwaukee use chlorine or chloramine?

Chloramine. Milwaukee Water Works adds ammonia, which changes the chlorine to chloramine, a disinfectant that lasts in the pipes.

Has Milwaukee’s water system had violations?

Milwaukee’s water system had no health-based violations in the five years through September 2026, according to the U.S. Environmental Protection Agency’s (EPA’s) federal database.